EasyPad™

Torna Dietro

Installing the EasyPad

  • Clean your print platform thoroughly and make sure it is free of any debris.
  • Trim the Formfutura EasyPad sheet to match the size of your build plate (if not already).
  • Remove the white adhesive liner and apply the Formfutura EasyPad sheet to the cleaned print platform.
    • Start from one edge of the platform and work your way to the other edge, smoothing the Formfutura EasyPad sheet with a credit card or decal applicator.
  • Re-level your print surface and ensure that the nozzle height is properly set (usually between .10 and .25 mm).

Removing your print from the EasyPad

There are several ways to remove your printed object from the Formfutura EasyPad.

Adjusting the heat bed temperature

Most materials can be easily removed from the EasyPad once the print is finished by adjusting the print bed temperature. For materials that do not require a heated bed it help to heat up the print bed to the material’s heat deflection temperature. For materials that do require a heat bed during printing it helps to let the bed cool down completely before removing the printed object.

Using a spatula or putty knife

A spatula or putty knife with smooth/rounded corners can also be used. it is important to only use a spatula or putty knife with smooth/rounded corners to prevent damaging to your Formfutura EasyPad sheet.

Avoid using solvents, such as acetone, to clean your EasyPad.

Dimensioni

100×100 mm, 165×165 mm, 200×200 mm, 300×300 mm, 600×400 mm

Recensioni

Ancora non ci sono recensioni.

Solamente clienti che hanno effettuato l'accesso ed hanno acquistato questo prodotto possono lasciare una recensione.

POTREBBERO INTERESSARTI

EasyFil PLA – Red

23,93 + IVA Scegli

ISCRIVITI OGGI E OTTIENI

UNO SCONTO DEL 5%

su

Una spesa di almeno 50€.

*Tranquillo, non amiamo inviare mail di spam

×

Ottieni il 10% di sconto con un LIKE!

Dai un LIKE alla nostra Pagina Facebook e ottieni subito un coupon del 10% per il tuo carrello.
Tutto quello che devi fare è regalarci un LIKE e confermare la tua mail.

Nota: Il coupon generato è valido solo se confermi la tua mail.